2A14 LD10 A2014 2014 aerospace aluminum plate EN AW-2014 for aerospace Die forgings
Alloy:2A14 LD10 A2014
Temper :T4,T6,T351
Standard
1. Chemical Composition Limit: GB/T3190-2009
2. Mechanical Property :GB/T3190-2009
Heat treatment of aluminum alloy standardize :
- Homogeneous annealing
- Completely annealing
- Rapid annealing
- Quenched &Aging
2A14 LD10 A2014 aluminum Chemical Composition Limit
| Cu | Mg | Mn | Fe | Si | Zn | Ti | Ni | other | Al |
| 3.9~4.8 | 0.40~0.8 | 0.40~1.0 | 0.7 | 0.6~1.2 | 0.3 | 0.15 | 0.1 | 0.1 | remainder |
2A14 LD10 A2014 aluminum Mechanical properties
| Tensile strength σb (Mpa) | Yield strength σ0.2(Mpa) | Elongation δ10 (%) |
| 477～485 | 361～383 | 13～14.3 |
2A14 LD10 A2014 aerospace aluminum grades sheets specification
| Alloy Series | Alloy | Tempe | Thickness | Width | Length |
| 2 series | 2A14 LD10 A2014 | T4,T6,T351 | 4~12mm | 1000~2600mm | 2000-24000mm |
| 2 series | 2A14 LD10 A2014 | 12~260mm | 1000~3800mm | 2000~38000mm |
2A14 LD10 A2014 aerospace aluminum grades in aerospace
| Item | Alloy | Temper | Application |
| 1 | 2A14 LD10 A2014 | T4,T6,T351 | Used for aerospace forgings and Die forgings |
FAQ:
Q1: What's your standard large size specification ?
A: Standard large specification is 1500*3000/4010mm
Q2: Are the package suitable For export ?
A: Yes , it is suitable for export.
Q3: Can you supply PVC protect film on the plate?
A: Yes,we can
2A14 LD10 A2014 aerospace aluminum grades sheet
About JIMA Factory
About our packing & packing Mark for shipment
Product Tags:
|
|
2A14 LD10 2014 Aircraft Aluminum Plate EN AW 2014 For Aerospace Die Forgings Images
|
